Mechanical Concrete Crusher
• Mechanical structure, no need of hydraulic line.
• Low vibration, low noise (the noise level outside the working site is 79db) with easy maintenance,
more cost effective.
• By using the U-bend for installation just only need 30 minutes
• The maximun concrete crushing strength and thickness are 50 n/mm2 &700mm respectively
PARAMETER
| Model | NGC-70 | NGC-120 | NGC-220 |
|---|---|---|---|
| Excavator weight (t) | 6-7 | 12-13 | 20-22 |
| Max.openning size (mm) | 450 | 770 | 800 |
| Front crushing power (N/mm 2) | 140 | 210 | 300 |
| Middle crushing power (N/mm 2) | 160 | 330 | 520 |
| Weight (kg) | 360 | 660 | 1100 |
| Crushed size (mm) | 100-200 | 100-200 | 100-200 |
| 24V Magnet | 400*300 | 500*400 | 500*400 |
Crusher Bucket
By reversing the rotation, clogged materials can be easily released. The upper and lower jaw plates can be exchanged with each other, and the rear and front sections can also be exchanged. We are using direct drive system which makes maintenance much easier. The reinforcing bars can be easily removed from crushed reinforcement and this product requires drain line.
PARAMETER
| Model | UJ-120 | UJ-200 | UJ-300 | UJ-680 | UJ-870 |
|---|---|---|---|---|---|
| Excavator weight (t) | 10-18 | 18-30 | 30-45 | 50-70 | 75-90 |
| Bucket capacity (m³) | 0.45 | 0.74 | 1.15 | 1.47 | 2.23 |
| Oil flow (l/min) | 180 | 260 | 260 | 450 | 600 |
| Feeding size (mm) | 400*550 | 500*700 | 500*1000 | 670*1150 | 670*1316 |
| Adjustment size (mm) | 1617*1055*1313 | 2506*1325*1731 | 2346*1576*1665 | 2882*2105*2137 | 2882*2271*2137 |
| Overall Weight (kg) | 1359 | 3450 | 4220 | 6850 | 7668 |
Milling Machine
Milling machines are divided into horizontal and vertical milling machine. It is widely used in open-pit coal mine, tunnel excavation and outline correction, channel groove milling and digging, asphalt concrete pavement milling, rock digging, toots milling, milling of permafrost, iron and steel industry, forestry and other construction field.
PARAMETER
| Model | MD80 | MD150 | MD240 | MD350 | MD450 |
|---|---|---|---|---|---|
| Operating weight（kg） | 372 | 845 | 1340 | 1860 | 2620 |
| Input power（kw） | 25 | 30 | 52 | 60 | 120 |
| Max.power（kw） | 34 | 40 | 62 | 70 | 140 |
| Max.operating power（bar） | 350 | 350 | 350 | 350 | 350 |
| Oil flow（I/min） | 30-50 | 60-90 | 80-140 | 140-210 | 260-450 |
| Cutting speed（rpm） | 120-200 | 90-130 | 65-113 | 50-90 | 40-70 |
| Cutting head torque（Nm） | 3200 | 5800 | 10900 | 24000 | 36000 |
| Cutter dia.（mm） | 360 | 460 | 590 | 620 | 730 |
| Carrier weight（tons） | 3.0-8.0 | 8.0-15.0 | 15.0-24.0 | 18.0-35.0 | 30.0-45.0 |
Hydraulic Pulverizer
Excavator pulverizer is a convenient and fast tool for dismantling equipment, with strong crushing ability, which can decompose reinforced concrete quickly, demolition of buildings such as beams and pillars of apartment buildings, with super size serrated teeth,the design of teeth reinforced by the occlusal surface, large crushing area and high crushing efficiency.
PARAMETER
| Model | Excavator Weight(Ton) | Working Press(Mpa) | Opening Size A(mm) | Blade Length B(mm) | Front Crushing Force(KN) | Middle Crushing Force(KN) | Weight(kg) |
|---|---|---|---|---|---|---|---|
| FSQ13 | 12-15 | 31 | 600 | 350 | 605 | 1340 | 850 |
| FSQ20 | 18-25 | 31 | 850 | 510 | 980 | 1560 | 1900 |
Brush Cutter
Brush cutter is a machine tool used to cut vegetation of large barren hills. The blade is mounted on
the output pin of the hydraulic motor and it cuts by using hydraulic motor's high-speed rotation. It
can save weeding workers' working time and reduce a lot of human resources.
1. type can choose: rotation, fixed
2. the cutter head chooses one or more, can be replaced
3. the cutter head is bolted for easy maintenance
4. stump smashing, erecting and smashing, shrub shredding
PARAMETER
| Model | BCB-70 | BCB-120 | BCB-200 |
|---|---|---|---|
| Apply to (ton) | 6-8 | 12-16 | 18-23 |
| Blade Qty | 50 | 70 | 116 |
| Working Pressure (bar) | 200 | 200 | 200 |
| Oil Flow (L/min) | 50 | 80 | 120 |
| Weight(kg) | 520 | 950 | 1150 |